Best way to make a homemade pipe?

Hey well i made on from using a top from a pop bottle and the shaft of a pen. what i did was i took the pen an wraped it with tin foil then wraped the tin foil around the bowl dont worry about inhaling any tin foil vapors. EASY AS THAT!

this whole thread makes me laugh!!!

dude, a shotty bottle, very ghetto.
plastic bottle, fanta fruit twist works well
car aerial as a pipe, or cut a coke can roll up the metal into a pipe and celotape it together
burn a hole in the side of the bottle, wedge the aerial or can pipe in, fill it so the pipe is nicely in the water, hold the pipe up, check air tightness
ohh and don't forget.. take the lid off aha

This is to warn you all.

Smoking through aluminum objects may cause Alzheimer's Disease. Scientists are unsure of whether aluminum increases the risk of Alzheimer's Disease, or whether Alzheimer's Disease increases the level of aluminum in the body. People with Alzheimer's Disease were shown to have 10-30 times the amount of aluminum in their body than the average person.

Many pens are made out of polystyrene, which releases styrene monomer when it is heated to even LOW temperatures.

Styrene monomer has been proven to cause permanent brain dysfunction in humans who have been exposed to it, at levels as low as .01%. That is a very small amount. If you are heating this up with hot smoke, then you could be releasing huge amount of styrene, all which goes straight to the brain.

So make your pipe with wood or fruit or any food.

Ever try a Kazoo? the ghost of the sixties rises again, if you can't find one at your local mart, then I'm sure one can be had off the net. Unscrew an areator off of a faucet steal the screen voila instant pipe.

take a socket and put headphone screening in it. melt a hole in a waterbottle cap to where it can fit the socket. if you push the socket in the cap while its still hot as fuck itll make it air tight. melt another hole towards the bottom of the water bottle. hit it from the bottom and the cap/bowl head screws on and is easy to ditch.

i just used this and it rips lol i promise you that

gut a minimag light so its just metal meaning you gotta remove the black plastic plate the bulb goes into screw the metal top to the stem part then drop in a screen then put it in the side of a bottle by melting a hole then melt a hole for a carb at the top there is your new foil free bong

Here is a crazy one.
Get a regular Altoids metal container, regular black electrical tape, a 1/4" and 1/2" drill bit, a small screen, and about a 1" long and 1/2" wide steel pipe, and lastly a regular pen that you can get the plastic casing from.

By the way, if done correctly, this will NEVER LEAK AND YOU CAN MOVE IT AROUND FAIRLY EASILY!!!!

Anyway. Drill a 1/4" hole on the top on one end and center it. [__x]<drill here
Push the screen into the pipe using the pen to get it tight.

Then on the opposite side drill a 1/2" hole. drill here>[x__]
Wrap the base of the steel pipe with tape only going around once then put the steel pipe in the container.

Tape around the edges of the container, where it opens up and remember you don't want it to leak.
Put about 4 table spoons of water into the container.

After hollowing out the pen case wrap tape around the base of the pen case once, where the writing part comes out, then insert it into the first hole you drilled.

As far as a carp, just pull the pipe out a bit. It should seal very nicely so you get no water or air leaks and its small enough to put in your pocket so its lowkey.

If you need more instructions or help, hit me up.

Gravity bong!!!! get a pale, a 2 liter bottle, tape, and some water. Fill the pale with water. Cut the bottom of the 2 liter off. Flip the cap and tape it to the top and put little holes on the cap and PRESTO! I haven't hit a gravity bong in SO long! Just don't torch it too much or you will burn the plastic cap and get a shitty taste. And don't use too much tape. You need to be able to remove it.

If you don't know how to use it just put the bottle in the water s low as you can without your bowl getting we. Light the weed and slowly pull the bottle up to desired heighth. Pull off cap and inhale while you push the bottle down.

what you need: 2 pencils,a pen,a pen cap,a plastic bottle, a lighter

what to do:take the metal part that holds the eraser off of the pencils take the eraser out pinch one end of one of the metal thingy into itsefshove it into the pencap then shove the other 1 in ontop of it then bend the top part over the plastic so u dont inhale it. then burn a hole into the bottle close to the bottom then take the pen apart and put the hallow tube into the hole (try to make the hole the size of the pen tube) melt the cap to the tube burn a carb hole add water n u have a bong!!! feel free to ask questions if u decide to use this!

The BEST pie starts with the best crust. For this, you need CHILLED ingredients. And, it's all in the wrist.
Oh- ooooops.
PIPE, not PIE.
My bad...

CHEAP! $3 for a cone


Get a cone piece, 1 hose (length according to bottle/easily obtainable from a neighbour), 1 gatorade/powerade (not sure how the bottle looks elsewhere other than aus http://thefoodfarce.com/wp-content/uploads/2010/05/Gatorade_Drink.jpg).

1. Melt the hose so the cone piece sticks on and its airtight
2. Melt a small hole and shove the hose into the hole. making sure its airtight.
3. on the otherside of the hose, burn the bottle for a shotgun hole
4. fill it with water and rip away.

Might take awhile to get the hang of making it airtight but will rip like a glassie.

They're easy to dispose of if you are getting your dorm raided, and easily made again if you do have to dispose.

The only way you would be inhaling foil is if it went from solid to liquid. A regular butane lighter isnt capable of melting foil. Foil pipes are perfectly fine.

No offense, but don't listen to this kid. Foil is definitely unhealthy.

I always just use a gatorade bottle(biggest one if possible) put a pen holder in the side,attach my bullet to the pen and use the top to inhale.

A socket with a screen also works for the bowl.

Variety of different choose from. Here's a list of them
Do It Yourself Smokes

I just made one recently out of a foosball tanle handle will post pics

My first bow was like 15 bucks... so you can get em cheap. But if you don't wanna buy one them get a gatorade bottle and a mechanical pencil. first like take everything out of the pencil so its just a tube, then put a hole near the bottom of the bottle but make sure its a good size for the pencil tube to fit into. then stick the pencil in and like put a little nug in the end and light it. you can replace the pencil with like a metal tube too. and then put a lil water in the bottom and add a shotgun if you want and take your hit out of the top of it.. hope that helped.

today i found a pipe that one of the kids i work with made. this kid made it out of playdough. does it work?? that i dont know but it looked really cool.

go buy yaself a cigar that comes in a metal container thing, normally bout 5 bucks. pull the cap off the end, poke a hole in it, poke a hole in the main tube near the sealed end. Line the holes of the cap and the tube up, bit of gum or the like and stick em together
you got a pipe and piece in one shot. can put another small hole in the tube as a little shot hole if your keen.




Uploaded with ImageShack.us