504W Test with LED Grow Lights by Hydro-Grow

My friend (who wishes to remain anonymous) allowed me to photograph her grow using 4, 126W Penetrator LED Grow Lights from yours truly. Her grow consisted of only 4 plants, split into two groups of 2, that were about 3 weeks apart from each other. The plants were in a 2' x 4' aeroponics tray that I also built, and only received LED light during this bloom cycle. You will notice a few left over HID's hanging in the background in the photograph, but that's all they did the whole time. They've since been removed for sale.

Anyhow, back to the grow at hand. The first pictures are from 8-22-09, when the oldest plants were about 3 weeks into bloom. The two larger plants are Strawberry Cough X White Rhino, and AK47. The smaller plants are Ice, and AK47. The nutrients used for this test were Humboldt Nutrients Master A & B, Ginormous, CalMag, and Molasses. The CO2 was at 700ppm during the first 4 weeks of bloom, and varied between 700-1100ppm during the remainder of bloom. Room temp was a steady 80-85 degrees, and the humidity was between 40-50%. Anyhow, enjoy the first picture, cause there's lots more to come.

This picture was taken 8-22-09:

These pictures were taken 8-26-09:

These pictures were taken 9-1-09:

My friend added an extra 126W to the group today, giving her a total of 5 now. So for the last few weeks, she'll have 630W LED in total spread out over her area.

These pictures were taken 9-4-09:

This next set of images shows you how our lights work. Some people were mistaken, thinking that each plant had access to 630W of LED, when this simply is not the case. Each 126W has a narrow footprint, as you can see below. The first picture starts with 4 lights on, and then we turn them off one by one. Flip back and forth through them a few times after they've loaded, to get the full effect.

These pictures were taken 9-10-09:

The following pictures are mainly for comparison purposes. To give you an item to compare to the buds, so you know how big they are. We show bottom buds and top buds, so have a look.

These pictures were taken 9-14-09:

So I took a vacation, which is why there is a lapse in photos. When I got back, I found out that the AK47 plant had been chopped about 1.5 weeks too early!!! So it doesn't show up in these pictures...

These pictures were taken 9-25-09:

So here are the results from the AK47 that was chopped early: 7.5 ounces dry weight.

My friend had some AK47 left over from her previous harvest with HID, so we found two buds nearly equal in size, one from LED, one from HID and compared them. You'll notice that the two vary in weight by 40%! The denser of the two was grown under LED.

These pictures were taken 9-29-09:

In these photos you get to see us weighing out the AK. Just subtract the number in the final photo (the scale measures pounds, then ounces, etc...) from the second to last photo and you get the 7.5oz's listed above.

These pictures were taken 9-29-09:

So here is the finale guys. The Strawberry Cough was cut 10-3-09. The rest of the plants were also chopped, not cause they were done, but because my friend wanted to make room for her next plants which she will be doing Scrog. I'll feature that grow on this thread next.

Anyhow, the SC is HUGE! The yield on her was just over a pound, though I haven't had time to run over and take pictures of her on the scale (aren't phones a great way of transferring info lol?). When I get a chance I'll take pictures on the scale for ya.

These pictures were taken 10-4-09:

So to follow up, the total yield from this crop was about 1lbs 13oz's once finished. That included a plant cut 1.5 weeks early, a plant that finished on time, and 2 plants chopped 3 weeks early. Not too bad for 504W LED which later turned into 630W LED. In the next grow she will take full advantage of her space though, using 6-7 plants per reservoir with Scrog. We should see yields this upcoming time closer to 3lbs.

On a side note, the Strawberry Cough plant yielded just over a pound. It was only receiving light from 2 of the 126W units (as demonstrated in the pictures), which means that our LED's produced nearly 2 grams per watt with that strain.

Hope you all enjoyed the grow pictures, and let me know if you have any questions. I will be stopping in to take pictures soon of my friend's new Scrog setup.

whaaa whaaat?!?!

That's pretty cool.

impressive

i was checking out your site. i see your largest light weighs 40 pounds. is that 40 "hanging" pounds? just curious

and the same light is used thru the entire cycle without changing anything?

can you try to tell me what the difference was in power usage?

Not sure what the difference is between hanging pounds, and regular pounds, but yes the 318W unit is 40lbs. The units contain the LED's, power board, heat sink, cooling fans, and power supplies in one compact package.

Our lights can be used throughout the entire grow cycle (clone to harvest). We determined the perfect ratio of color for the plants to carry out all levels of photosynthesis, during all stages of development. Instead of using more blue to create bushes, or more red to induce stretching, with our units all you do is adjust light height. 6-9" keeps your plants short and bushy. 10-12" causes your plants to stretch vertically (though not near as much as HID).

Prior to the grow featured above, my friend was using 3800W HID (you can still see some of the old units hanging in the room). She had 3, 1000W units and 2, 400W. So the comparison between the two buds showing density, is 630W LED vs 3800W HID. She is currently saving over $200 in electric each month as she literally cut her power bill by 6x, and stopped the need for A/C. She isn't using her full garden space though, but for the next grow she will be.

In my own garden I went from 4,000W HID to 1512W LED (12 x 126W units). My canopy occupies 5' x 6', and my yields are excellent. I save over $160 a month on power, and several hundred a year on bulbs.

LED i made another post on a different thread asking the same thing again. please ignore and thanks for your response.

What more is there to say than ... WOW 2 grams per watt ... unreal.

I just sat here for 10 minutes staring at the screen speechless ... I don't know what to make of this. Ummm ... One hell of a green thumb your friend has

My friend started her new grow recently using between 15 and 16 plants amongst both of her 2' x 4' aero trays. She is using netting to try her first "Scrog" grow. Over 1 unit she has 5, 126W lights, and on the other she has 4, 119W lights. All in all that makes 1106W LED.

These pictures were taken 8-15-09:

sounds like bullshit to me.. she must not have been using high pressure sodium, h.i.d. lights

Badass set-up...I hope to have that many LED's in my rooms here soon. But im still in the works with building my rooms. I would think that a fixed wire screen over the top of the plants with 2"x2" squares would do better than the net though...but this is just from me researching some scrog grows and reading a lot on the subject.

Tell your friend to keep up the good work and keep the pictures coming.