someone know a easy way to make oil.?

purpleHAZE

i was cheking out some ways to make oil but it all seemed really confusing i was wondering if someone know a easy way to make it ?

Osprey

Butane hash is probably your best bet. It's not too complicated and the results are good. Is there a write up here on it? If not I could probably do one.

Blitzed

__________________

Osprey

Ah, I didn't even think of that. I was thinking hash oil. Whoops.

__________________
What are we? What is to become of us? This and more, after the break. . .

Blitzed

__________________

Osprey

Well, first you have to grind up the dinosaurs. . .

__________________
What are we? What is to become of us? This and more, after the break. . .

purpleHAZE

i think people with common sence will know is hash oil couse i think nowone can make petroleum..........

Blitzed

__________________

Osprey

I still vote for the butane extraction. It's quick and simple. Well, relatively.

__________________
What are we? What is to become of us? This and more, after the break. . .

premdharma

Yes I do know a very easy and safe way to make oil. It's not going to come out as pure as a 'honey oil', but will still be a good product. It's simple,
first grind up all plant material well and place in a glass jar with a lid on top.
Let it sit for about a week. Then remove lid and pour off all liquid though a cloth strainer into a glass bowl. It's important to use a white cloth with no dyes, I find a thin mens hankerchief works well. Then all you have to do is set the bowl out in a room for aprox. 1 to 2 days and let the everclear evaporate off of it. While it's doing this it's good to cover the bowl with a screen to keep any dust or lint out of it. You will end up with a very thick deep green oil. It will be so thick that it will not pour or run at room tempature, it is so thick it is hard to spread on a paper and usually must be heated up slightly to do so. After doing this it is sometimes advisable to do a second wash of the plant material with more everclear and then to repeat the proceedure.
As I said it's not as pure as a honey oil extracted with ether or butane, but is a safe good product.
One little known way to purify it more is to take it right after it has been poured off the plant material and still has all of the everclear in it and put it back in a clean jar. Then you take activated charcoal like you'd buy to use in a fish tank and put it into the jar with the oil solution and put a lid back on it again. Then you let it sit for quite a few more days. Each day you will notice a subtle color change in the liquid. It will start to turn from green to browish to golden brown. This is the activated charcoal absorbing the chlorophyl slowly. When it reaches a color you like then you simply strain it again and then let the everclear evaporate. This will yeild a golden brown thick oil. It also is not as pure as you'd get with an ether extraction, but is still safe. I've only seen this done a few times though and don't remember how much activated charcoal wasused for how much liquid, so one would have to experiment with this method. I do know that if a jar was say
8 inches full of liquid the activated charcoal added might be a layer on the bottem of say only 1/4 to 1/2 inch if memory serves me correctly.
Good luck.

grodan

Look here - Honey oil made easy

I have heard very good things about the Honey Bee, and will be getting one soon to make oil from the skuff of my grow.

syrous

yeah bro get some rubbing alcohol 100% from drug store,put shake in pot then pour alcohol over it i only let it sit for 24hrs or so but you can let it sit for a month if you wish youll get more oil but it is full of plant material and is crazy green,get an electric frying pan so there is no flame or open element,strain liquid into old crappy pot because it will not get clean,crank up frying pan put the pot on and watch it turn to oil leave it a tiny bit runny and it will thickin but the last few minutes are crucial you dont want to over cook or it will be poo,i advise to cook on balcony or roof or a safe backyard the fumes stink and arent to good for you,or take a footlong piece of hard vacum hose or pvc or something around 2" diameter find 2 caps put alot of holes in the bottom one then get some butane whatever a 5 buck can is get 2 or three put whole in second cap for the butane nozzle fill with a fat sandwhich bag full of skeef put on gloves then empty contents of cans into tube allowing to strain on a plate or bowl until the liquid becomes clear with no yellow tinge and watch it boil at room temp in a few minutes you will have honey oil but use lighter butane not camping fuel butane oh and the oil made with alcohol the shake can be reused 5 times at least if you only soak 24 hrs use it till the oil stops getting you high enjoy

HighSeeker

Right on. Good info.

Peace

__________________

stoner4201979

this is how i make my oil
i am a little fucked up this morn so please bare with me
first get a pvc pipe about a foot and a half long and ahalf ince
then two end caps to fit on the pipe
and some coffe filtters
then in one of the end caps u r going to drill a hole right in the middle just
big so it will fit the end of ur can in it nice and snug (this is the top)
the other cap u a going to drill 7-8 holes and make it look like a pepper shaker(this is the bottom)
now ur gonna grind all ur shit real fine and pour it in the pipe and then pack it down a bit not to much now
then put the top on with the coffie fitter on the inside
have a dinner plate to catch the stuff into
can ur can of shit put it in the top and push down
u will then see a yellow stuff falling onto the plate
wait about 20-30 mins scape up oil into 1 gram bottles
like i said i am kind of fucked up right now
and trying to type with a broken hand does not make shit easier so if i missed anything feel free to add it

Indica420

Yeah honey Oil Is The Way To Go I Make It All The Time And It Gets You Really Really High

__________________
FTW Some Might Say Fck The World I Say Free The Weed